Power Harness Does Not Connect Properly

Wire(s) Won't Fit (for kit's wiring harness)

Potential Solutions:

• The bulb and/or wiring are the wrong one for the vehicle. Double-check to see if it is correct or not, especially if the vehicle is using an aftermarket headlamp assembly.

• The factory harness plug that the kit is being connected to is incorrect. Double-check to see if it is the one that plugged in directly into the rear of the stock halogen bulb.

• The pins or prongs of the kit’s wiring harness or relay (that go into the vehicle’s factory harness plug) need to be removed from their plugs and directly inserted into the factory harness plug.

• The pins or prongs of the kit’s wiring harness or relay (that go into the vehicle’s factory harness plug) need to be physically modified to fit.

• There may be splicing or hard-wiring required to connect the kit to the vehicle’s headlamp electrical system.